| HOPAC Super Stock Car Class Rules (2010 season) |
|
| 1) | Cars eligible to compete in the Super Stock class include the BSRT G3® platform of cars. |
| 2) |
The chassis must be
stock and cannot be modified in any way except for the following: |
| 3) | The armature and traction magnets must be BSRT G3® Ceramic or BSRT G-Force™ Ceramic-Grade material and cannot be cut. Magnets must remain in their stock position. |
| 4) | Armatures must be stock or BSRT stock replacement. All arms must be narrow gap design, and be a minimum of 6.1 ohms. Motor bushings must be stock or BSRT stock replacement (no ball bearings allowed). |
| 5) | All electrical system parts must be stock or BSRT stock replacement. BSRT Helper Springs may be used. |
| 6) | The axles, gears, gear spacer (optional), guide pin, tires, and wheels must be stock or BSRT stock replacement. Gears may be lightened and axle spacers may be used to aid with gear mesh. Front and rear rims may be drilled or lightened. |
| 7) | Glues/adhesives are not allowed on the chassis except to attach the body mounting system and retain the guide pin. |
| 8) | Vacuum-formed bodies may be used provided they meet all General Rules. |
Back to HOPAC Rules &
Regulations
|
Question? | Order? | Home | AFX | Books | BSRT | Collectibles | Life-Like | Mattel | Parma | Racing |
| This
page was last edited on:
01/11/10
|
Copyright 2010, Scale Auto. All rights reserved. No part of this web site may be reproduced or transmitted in any other form or means without the prior written permission of Scale Auto. |