HOPAC Neo Modified Car Class Rules (2010 season)
1) Cars eligible to compete in the Neo class include the BSRT G3® platform of cars.
2)

The chassis must be stock and cannot be modified in any way except for the following:
   a) Add body mounts.
   b) The pickup tabs on the chassis may be reinforced and/or replaced.
   c) The chassis may be modified to retain the rear axle.
   d) The bottom surface of the chassis and traction magnet clip may be sanded.
3) Any HOPAC-approved Neo motor and traction magnets may be used. Non-magnetic material may be used to restrict the movement of the traction magnets.
4) Any BSRT armature may be used. Motor bushings must be stock or BSRT stock replacement. BSRT ball bearings are allowed.
5) All electrical system parts must be stock or BSRT stock replacement. Shunts are allowed. BSRT Helper Springs may be used.
6) The axles, gears, gear spacer (optional), guide pin, tires, and wheels must be stock or BSRT stock replacement. Gears may be lightened and axle spacers may be used to aid with gear mesh. Front and rear rims may be drilled or lightened.
7) Glues/adhesives are not allowed on the chassis except to attach the body mounting system and retain the guide pin.
8) Vacuum-formed bodies may be used provided they meet all General Rules.


Back to HOPAC Rules & Regulations

Question?  |  Order?  |  Home   |  AFX  |  Books  |   BSRT  |  Collectibles  |  Life-Like  |  Mattel   |  Parma  |  Racing
This page was last edited on: 01/11/10
Copyright 2010, Scale Auto. All rights reserved. No part of this web site may be reproduced or transmitted in any other form or means without the prior written permission of Scale Auto.